Short Weight Sariya: How to Spot It, How to Measure It and What to Do Next

You weighed the load, the number is lower than the invoice, and the supplier has already left. This is the moment most buyers give up, because nobody has told them what comes next. Spotting short weight is only half the job. The other half is measuring it properly, recording it and getting it corrected without ruining the relationship that supplies your next load. This is a plain sequence that works on a house site, a commercial project or a contractor's yard.

How to spot it

Short weight shows up in three places. The first is the bar itself: a bar thinner than the size on the invoice weighs less per metre. The second is the length: rods cut short of 12 metres. The third is the count: bundles with fewer bars than the tag. A weighbridge difference between the invoice weight and your weighing of the loaded and empty vehicle will tell you that something is wrong, and the checks below will tell you which of the three it is.

How to measure it

  • Pick three bars from different bundles and cut one metre from each.
  • Weigh each piece on a scale you trust and write down the figure.
  • Compare it with the expected weight: the diameter in millimetres squared and divided by 162. A 12 mm bar should be 0.889 kg per metre, a 16 mm bar 1.580 kg and a 20 mm bar 2.469 kg.
  • Measure the length of at least ten rods and count the bars in two bundles.
  • Photograph the scale reading next to the bar and the bundle tag.

A difference of a few grams is within the tolerance the standard allows. A shortfall of several per cent across all three pieces is not.

What to do next

Write the observed weight and the difference on the delivery challan or on a separate signed note before the vehicle leaves, if you can. If it has left, send a message the same day, with photographs, to the dealer and to the manufacturer's sales team, and ask for a re-weighing in the presence of both sides. Keep the language factual: size, expected weight, measured weight, date and vehicle number. Most reputable suppliers correct the quantity or replace the material once the figures are in front of them.

How to avoid it next time

Buy from a maker that stands behind each bar. CRS TMT bars from Moira Sariya are sold through dealers and can be traced to the manufacturer, and the Moira video testimonials show what other buyers say. Make the weighing of every load a routine and agree on it in writing when you place the order. Write the grade in the order too, whether it is Fe 500D TMT bars or the Fe 550D grade, and ask for the weight per bar so that quotes can be compared on the same basis. Steel that is also corrosion resistant is worth a look, and you can read why corrosion resistance matters before you place an order for foundations and plinths.

Where to find more

For more guides like this one, read more on the Moira blog. Moira Sariya is a TMT bar manufacturer in Madhya Pradesh, with its plant at Pithampur in Dhar district and its corporate office in Indore. You can read more about Moira Sariya, use the Moira dealer locator to find a dealer or ask for a TMT bar quote for a bigger order. Questions can also be sent to sales@moira.in.

Comments

Popular posts from this blog

Why Seismic Resistant TMT Bars Are Essential for Modern Construction??

Why HR Pipes Are Widely Used in Construction and Fabrication

Best TMT Bars for Strong and Durable Construction: A Complete Buying Guide